Introduction
This troubleshooting guide helps you resolve common audio and video issues with your OREI BK-401ARC 8K 4-in-1 HDMI Switch with ARC/eARC. It covers signal loss, audio extraction, eARC behavior, auto-switching, resolution problems, and firmware-related concerns.
Issue description
The BK-401ARC is designed to route HDMI video and extract audio through HDMI ARC/eARC, optical, or 3.5 mm output. You may experience issues if your source device's audio format, EDID DIP switch setting, HDMI cable quality, or ARC/eARC mode does not match your connected display or audio system.
Signs
- You do not get audio from your AVR or soundbar.
- Your AVR displays Decoder Off.
- The eARC LED flashes, or your soundbar does not receive audio.
- Audio works on one input but not another.
- You experience intermittent audio dropouts, flickering, or random signal loss.
- Auto-switching does not change inputs as expected.
- 4K, 8K, or HDR video does not display correctly.
- Optical or 3.5 mm audio does not support your expected surround sound format.
Basic troubleshooting steps
Checklist:
- Confirm that your source device's audio output format matches the output you are using. 3.5 mm supports LPCM 2.0 stereo only. Optical supports LPCM 2.0, Dolby Digital, and DTS 5.1 only. Optical does not support Dolby Atmos or TrueHD.
- Check whether ARC/eARC is turned on or off. When ARC/eARC is OFF, IN 1 functions as a normal HDMI input. When ARC/eARC is ON, IN 1 becomes the soundbar port.
- Verify the HDMI cable connections at your TV, source device, soundbar, and AVR.
- Use HDMI 2.1 Ultra High-Speed cables, preferably under 15 ft, for 8K and 4K@120Hz performance.
- Check your EDID DIP switch setting. The default is 111 for Copy OUT. Other modes include 110 for Copy TV video + soundbar audio, 101 for 8K 2CH, 100 for 8K 5.1CH, and 011 for 8K 7.1CH.
- Power cycle your switch, source device, display, and audio system.
- If auto-switching is unreliable, use the front-panel button or remote control to switch inputs manually.
Advanced troubleshooting steps
Step 1: Verify the source audio format
If your AVR or soundbar shows Decoder Off, your source may be sending an unsupported audio format. Set your source to PCM/Stereo for 3.5 mm output, or Dolby Digital or DTS 5.1 for optical output. If you are using eARC, confirm that your source and TV support your desired audio format.
Step 2: Confirm the correct ARC/eARC mode
If IN 1 is not behaving as expected, check the ARC/eARC button state. When ARC/eARC is OFF, IN 1 functions as a standard HDMI input. When ARC/eARC is ON, IN 1 is reserved for the soundbar connection. If you select the wrong mode, audio routing may not work correctly.
Step 3: Check TV eARC settings and port selection
If you are using an eARC soundbar, make sure eARC is enabled in your TV settings and that the switch is connected to your TV's ARC/eARC HDMI port. If the eARC LED is flashing, reconnect the HDMI cable securely, try a different HDMI cable, and toggle the eARC function off and on again.
Step 4: Test the EDID DIP switch settings
Incorrect EDID settings can cause audio dropouts, missing surround sound, or video handshake problems. For troubleshooting, set all connected devices to COPY when possible. If needed, test the available EDID modes one at a time: 111 Copy OUT, 110 Copy TV video + soundbar audio, 101 8K 2CH, 100 8K 5.1CH, and 011 8K 7.1CH.
Step 5: Replace or shorten HDMI cables
Older or low-quality HDMI cables can cause intermittent audio, flickering, or no signal after standby. Use certified HDMI 2.1 cables and keep cable lengths under 15 ft where possible. Test with a different cable between your source, switch, TV, and audio device.
Step 6: Power cycle all connected devices
If you lose audio after changing source modes, such as switching your Steam Deck from Gaming Mode to Desktop Mode, or if your display loses signal after standby, fully power cycle your source device, the BK-401ARC, your TV, and your AVR or soundbar. This can restore the HDMI handshake and audio detection.
Step 7: Test with another source device
Some cable boxes, satellite receivers, and newer game consoles may output audio formats that are not compatible with your selected output path. Test with a different source to determine whether the issue is device-specific. If the alternate source works, adjust your original source's audio settings or contact the device manufacturer.
Step 8: Review auto-switching behavior
Auto-switching may not work reliably with streaming devices such as Apple TV, Fire TV, or Roku because they can remain in standby while still sending a 5V HDMI signal. In these cases, use manual switching with the front-panel button or remote control.
Step 9: Confirm audio path limitations
The BK-401ARC cannot output eARC and optical audio simultaneously. If you need simultaneous dual audio output, use the OREI DA41 instead. Also note that optical does not support Dolby Atmos, and 3.5 mm output supports stereo only.
Step 10: Verify 4K and 8K compatibility
If you are unable to get 4K resolution, confirm that both your source and display support your target resolution and refresh rate. Use HDMI 2.1 Ultra High-Speed cables and make sure your EDID DIP switch setting matches your desired video and audio output.
Step 11: Check for firmware updates
If a new device, such as a Nintendo Switch 2, is not working correctly, or if you continue to experience audio and video issues after basic troubleshooting, your unit may need a firmware update. Firmware updates are performed through the USB-C SERVICE port. Contact OREI support to obtain the firmware file and update instructions.
Contact support
If the issue continues after completing the steps above, contact OREI support with the following details: your BK-401ARC model number, source device model, display model, audio device model, current EDID DIP switch setting, cable types and lengths, and a brief description of the problem. If available, include photos of your setup and the LED indicators.
Disclaimer
This guide is intended for general troubleshooting only. Product behavior may vary depending on your connected devices, cable quality, firmware version, and system configuration. If you are unsure about any step or the issue remains unresolved, please contact OREI support before making further changes.
Comments
0 comments
Please sign in to leave a comment.